Tork 2021 Photocell

The Tork 2021 Photocell features a durable high impact, UV stabilized polycarbonate housing, UL listed photo-control. It is ideal for applications where it is essential to aim the photocell in an exact direction to sense natural light but avoid artificial light. The Photocell responds to the light spectrum near to that of a human eye rather than passing vehicles. The voltaic switch allows the photocell to turn ON with the absence of UV sunlight.Photocells can be used stand alone, or with a timer.

The Tork 2021 Photocell is user-friendly with a plug (does not require wiring). Available with 3 different wire lead options; 6” for direct mounting to the transformer or 10’ and 20’ wire leads for remote mounting.

Features:

• All Lexan enclosures are impact and vandal resistant, translucent Lexan dome prolongs cell life by further screening out ultraviolet rays, dome and base are ultrasonically welded for maximum strength

• The sensor is conformal coated cadmium-sulfide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye

• Photo control works with screw base CFLs including LED with easy on and off that average less than 1-Watt power consumption, turn on is 1 to 5fc, turn off is 3 to 15fc, without the slide in position, on/off adjustment is easily made by moving a slide cover, no tools required

• The Tork2021 is easy to operate as it has delay up to 2 minutes to prevent false switching due to light from passing vehicles, lightning, etc. in a wide temperature range of -40 to +140F (-40 to +60C)

• Cell is cadmium-sulfide, epoxy conformal coated, 1/2 in. diameter with contacts that will remain closed between dusk and dawn, and (the unit fails in the on position, it comes with 3 colors coded lead wires that are a minimum 6 in. wire leads, #16AWG, rated for 105C

*Note:  If you do not have a Nightscaping transformer, please contact the office so we can ensure the plug will work with your transformer.